Analytic solution for the nucleolus of a three‐player cooperative game

The nucleolus solution for cooperative games in characteristic function form is usually computed numerically by solving a sequence of linear programing (LP) problems, or by solving a single, but very large‐scale, LP problem. This article proposes an algebraic method to compute the nucleolus solution analytically (i.e., in closed‐form) for a three‐player cooperative game in characteristic function form. We first consider cooperative games with empty core and derive a formula to compute the nucleolus solution. Next, we examine cooperative games with nonempty core and calculate the nucleolus solution analytically for five possible cases arising from the relationship among the value functions of different coalitions. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

轮毂电机驱动车辆转向控制策略

为提高轮毂电机驱动车辆转向机动灵活性以及安全稳定性,提出了一种基于直接横摆力矩控制的转向控制策略。以带有双桥转向机构的8轮轮毂电机驱动车辆为研究对象,研究其双重转向控制问题,建立基于车辆二自由度单轨模型的车辆参考模型,并以横摆角速度作为控制变量,建立基于横摆力矩PID控制器和横摆力矩分配控制器的转向分层控制模型。利用硬件在环实时仿真实验对所提出的转向控制策略的可行性和有效性进行分析验证。     

多级感应线圈发射器测控系统设计

将电枢加速到较高速度，通常需要多级感应线圈连续加速；而提高多级感应线圈发射器的发射效率，则要求在电枢处于驱动线圈最佳触发位置时，电容器组同步放电。同时，需要采集发射过程中电枢的速度、电源的放电电压和放电电流等数据。因此，研制合理的测控系统是多级感应线圈发射器的关键。     

Adjacency‐based local top‐down search method for finding maximal efficient faces in multiple objective linear programming

It is well‐known that the efficient set of a multiobjective linear programming (MOLP) problem can be represented as a union of the maximal efficient faces of the feasible region. In this paper, we propose a method for finding all maximal efficient faces for an MOLP. The new method is based on a condition that all efficient vertices (short for the efficient extreme points and rays) for the MOLP have been found and it relies on the adjacency, affine independence and convexity results of efficient sets. The method uses a local top‐down search strategy to determine maximal efficient faces incident to every efficient vertex for finding maximal efficient faces of an MOLP problem. To our knowledge, the proposed method is the first top‐down search method that uses the adjacency property of the efficient set to find all maximal efficient faces. We discuss this and other advantages and disadvantages of the algorithm. We also discuss some computational experience we have had with our computer code for implementing the algorithm. This computational experience involved solving several MOLP problems with the code.     

不同电流波形下永磁推进电机电磁转矩的时步有限元计算

以12相永磁推进实验样机为研究对象,介绍了其结构特点及运行控制模式,建立了该电机的时步有限元仿真系统.采用有限元法对正弦波、方波、梯形泼电流波形下的永磁推进电机电磁转矩进行了数值计算,给出了不同电流下的功角特性曲线.研究结果表明,对于电枢反应较强的12相永磁推进电机,在通常功角范围内通入正弦波电流可产生较大电磁转矩.     

机动目标一维距离像RAT法线性化补偿

研究了机动目标宽带线性调频脉冲回波全去斜率信号模型,根据速度和加速度的调频频谱展宽特点,提出了机动目标宽带一维距离像线性化调频回波模型,给出了Radon模糊图转换(RAT)法线性参数估计与运动补偿方法,并进一步分析了测速和测距误差.仿真实验验证了RAT法一维距离像线性化参数估计与补偿,表明该方法很好地解决了运动参数未知情况下机动目标的一维距离像频谱展宽问题.     

基于分数阶傅立叶变换的ARM检测技术

分数阶傅立叶变换(FRFT)是傅立叶变换的广义形式,对线性调频(LFM)信号具有很好的能量积累作用.针对反辐射导弹(ARM)雷达回波信号的线性调频特性,提出了一种基于FRFT的反辐射导弹检测方法,并根据ARM信号的调频特性将FRFF局域化,缩小了峰值搜索区域,提高了检测效率.仿真实验表明该方法能够在高斯、非高斯分布杂波环境下有效地检测ARM信号.     

装甲车辆起动电动机综合试验台

采用较先进的磁粉制动器作为电机的负载,使电机加载平稳、可靠、恒定,并可连续调节负载大小;同时采用高精度的ZJ型转矩转速传感器并配合转矩转速仪,不但能测量电机稳态时的转矩、转速和功率,同时还可测试电机某一过渡过程中转矩、电流、转速随时间变化的数值并贮存或打印.     

A branch and bound algorithm for the minimum storage‐time sequencing problem

The minimum storage‐time sequencing problem generalizes many well‐known problems in combinatorial optimization, such as the directed linear arrangement and the problem of minimizing the weighted sum of completion times, subject to precedence constraints on a single processor. In this paper we propose a new lower bound, based on a Lagrangian relaxation, which can be computed very efficiently. To improve upon this lower bound, we employ a bundle optimization algorithm. We also show that the best bound obtainable by this approach equals the one obtainable from the linear relaxation computed on a formulation whose first Chvàtal closure equals the convex hull of all the integer solutions of the problem. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 313–331, 2001     

稳健局部线性嵌入方法

针对局部线性嵌入方法对于噪声的敏感性,从分析噪声对数据集局部特性的影响入手,提出了稳健局部线性嵌入方法。通过与局部线性嵌入方法的理论分析和实例对比,表明稳健局部线性嵌入方法不仅对噪声影响不敏感,而且对邻域的选择有较好的适应性,可更好地挖掘数据集的本征特性,具有更强的数据可视化能力。